Insert the units with mounting frames into the mounting boxes and secure them with mounting claws and screws. Press in the lightguides into the cover plate (plastic latches should align). If you have unit only: buy Switch Button with Lightguide (FG-WDSEU221-AS-8100) and Mounting Frame FIBARO/GIRA (FG-Wx-AS-4001) for every unit. 
If you have complete FGWDSEU-221: push the lightguide out through the single Cover Plate and use included switch button and mounting frame. Switch buttons, lightguides and mounting frames are necessary to install double and triple cover plates. When installing with FIBARO double and triple covers: When installing with Schneider cover plates: 
Snap the new outer cover plate to the device. Snap the new inner cover plate to the device. Insert the device with mounting frame* into the mounting box and secure with mounting claws and screws. When installing with Legrand cover plates: Snap the new switch button to the device. Snap the switch button adapter* to the device. Snap the new cover plate to the device. Insert the device with mounting frame into the mounting box and secure with mounting claws and screws. If you have unit only: buy Switch Button with Lightguide (FG-WDSEU221-AS-8100) and Mounting Frame FIBARO/GIRA (FG-Wx-AS-4001). When installing with FIBARO cover plates: You can adjust colour and/or intensity of the LEDs to suit the particular cover (using parameters 11, 12, and 13) or disable it by changing parameter 13 to 0. The light effect might look different for covers other than FIBARO Walli. Keep away from children and animals!īack To Top Installation Before installation This product is intended for indoor use only in dry locations.ĭo not use in damp or wet locations, near a bathtub, sink, shower, swimming pool, or anywhere else where water or moisture are present. will not be held responsible for any damage or loss of warranty privileges for other connected devices if the connection is not compliant with their manuals. To avoid risk of electrical shock, do not operate the device with wet or moist hands.ĭo not modify this device in any way not included in this manual. Any maintenance introducing changes into the configuration of connections or the load must be always performed with disabled fuse. Even when the device is turned off, voltage may be present at its terminals. All works on the device may be performed only by a qualified and licensed electrician. 
Faulty connection or use may result in fire or electric shock.
The device is designed to operate in electrical home installation. will not be held responsible for any loss or damage resulting from not following the instructions of operating manual. Read this manual before attempting to install the device!įailure to observe recommendations included in this manual may be dangerous or cause a violation of the law.
0 kommentar(er)
